A Current Choke Balun with a 3D Printed Housing

diy current choke balun 3d printed housing feature image

Overview: A vertical antenna is an unbalanced antenna, but it may still need a common mode choke balun to choke out the unwanted current flowing on the outer surface of your coax braid. Reasons for A Choke Balun: 1. Blocking Unwanted Radiation from the Feedline A vertical antenna uses the radial system (your elevated ground … Read more

A Ground-Elevated Vertical Based on 5.6m Whip — Improved

ground-elevated-vertical-improved-5.6m-whip

Overview Days ago, I built a ground elevated vertical based on a 5.6m whip for SOTA and POTA activations. As the radials went above the ground, it didn’t cause huge ground losses due to the poor real ground near the antenna. The antenna works really great, with the linked counterpoise, you just used 2 radials … Read more

A 50-ohm Full-Wave Loop for 2m Band

2m full-wave loop feature image

The full-wave loop antenna stands as a fascinating and effective alternative to the ubiquitous dipole, offering desirable characteristics such as gain of approximately 2dB over a dipole, a typically lower noise floor, and a closed-loop radiation pattern. Traditionally, a square or circular full-wave loop presents a feed point impedance in the range of 100-120 ohms, … Read more

A digiPi APRS Unit Based on a digiPi HAT

digiPi aprs unit digiPi HAT all-in one box

digiPi is a software system that is based on Linux for amateur radio digital communications. Its primary function is to make various amateur radio digital modes easily accessible via Wi-Fi through a standard web browser. It simplifies amateur radio digital modes operation by providing a pre-configured, bootable image for a Raspberry Pi. It supports a … Read more

A 260W Multi-Port Desktop Quick-Charge Unit

desktop charger 260w two type-c ports

Nowadays, we use more and more electronic devices in daily life and work—like smartphones, tablets, laptops and smart wearables. Our need for quick charging is growing fast. Some people may always feel they don’t have enough charging ports on the desktop. To fix this issue, here comes a project, which is an open-source DIY desktop … Read more

An Open Source MPPT Controller for Ham Radio Field Operation – Build Notes

esp32 mppt controller in work closed-up view

Background: For amateur radio operators engaging in Portable Operations in the Parks (POTA) and Summits on the Air (SOTA), reliable, efficient power is the backbone of successful activations. These activities often take place in remote, off-grid locations where solar power becomes a vital energy source. An MPPT (Maximum Power Point Tracking) controller is not just … Read more

Power Calculation

aprs weather

Introduction to the Project: As I know all Bresser Weather Stations models are open to be utilised in our projects like the model I have, the 7in1; others are available as per the 5in1, 6in1 and 8in1 models. That is a very good news. If you are a consumer not interested to make a project, in … Read more